The Hybrid HIRO”- Conventional HIRO System Integrated with 3D Scanning and Resin Prototyping

---

Original Article

Author Details : Dr. Navraj Mattua*, Dr. Aravind , M Virupakshab , Dr. Sumitra Reddy

Volume : 1, Issue : 2, Year : 2017

Article Page : 34-40

https://doi.org/10.18231/j.jco.2017.005

Suggest article by email

---

Abstract

Introduction: The prevalence of lingual orthodontics has been increasing among the youth who prefer to undergo treatment with invisible appliances. The HIRO system is the most popular and widely accepted technique for lingual appliance bonding as it is economical. However, the great precision required for this system renders it highly technique sensitive. The final finish of the case depends, to a great extent, upon the accuracy and precision of each step involved in the HIRO system.
Methods: The present technique describes a novel procedure for lingual indirect bonding using HIRO system. The conventional HIRO system has been modified by integrating 3D scanning and rapid prototyping with treatment planning and virtual diagnostic set-up.
Result: This procedure makes the set-up more accurate for a better finish and saves a lot of laboratory time.
Conclusion: The hybrid HIRO is a cost effective method for patients who cannot afford a fully customized lingual appliance. It also opens a range of possibilities for the incorporation of 3D technology in routine clinical practice.
Keywords: 3D Scanning, Resin prototyping, Virtual model, HIRO system.

How to cite : Mattua D N, Aravind D, Virupakshab M, Reddy D S, The Hybrid HIRO”- Conventional HIRO System Integrated with 3D Scanning and Resin Prototyping. J Contemp Orthod 2017;1(2):34-40

This is an Open Access (OA) journal, and articles are distributed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International, which allows others to remix, and build upon the work non-commercially, as long as appropriate credit is given and the new creations are licensed under the identical terms.